案例

沙特阿拉伯滨海别墅小区海水淡化项目

Project Overview

为沙特阿拉伯的一个沿海别墅社区而建, this compact seawater desalination plant supplies domestic water for residential buildings and shared facilities.

High-pressure SW RO section use KC-SW-8040 membrane are used for desalination, followed by remineralization and disinfection before the treated water enters the community storage and distribution system.

Treatment Process

1
Seawater Intake
2
Screening and Chemical Dosing
3
Media Filtration
4
Cartridge Filtration
5
First-Pass SWRO
6
Intermediate Water Tank
7
Second-Pass RO
8
Remineralization
9
Disinfection
10
Product Water Tank
11
Residential Distribution Network
1
Seawater Intake
2
Screening and Chemical Dosing
3
Media Filtration
4
Cartridge Filtration
5
First-Pass SWRO
6
Intermediate Water Tank
7
Second-Pass RO
8
Remineralization
9
Disinfection
10
Product Water Tank
11
Residential Distribution Network

RO System Parameters

The RO unit uses KC-BW-FR8040 fouling-resistant brackish water RO membrane elements.

The SWRO unit is equipped with 48 KC-SW-8040 seawater RO membrane elements, installed in 12 pressure vessels with 4 elements per vessel.

With a seawater TDS of approximately 40,000–45,000 mg/L, the system operates at a design flux of 12.3 LMH and a recovery rate of 42%. Operating pressure is maintained within 6.0–6.6 MPa, with a system salt rejection of approximately 99.6%.

The designed permeate capacity is approximately 22 m³/h, equivalent to about 530 m³/day of desalinated water.

Recommended Products for Similar Applications

海水RO膜元件

KC-SW-8040

较新
中国沿海供水海水淡化厂

相关项目